Jeep radio offers several benefits while driving. It can improve your driving experience and can provide entertainment on long journeys. Jeep radio keeps you informed about current events, you can listen to songs, and there are also many other benefits of jeep radio. Now suppose you are on a long drive and suddenly, your radio stops working. What would you do in this situation if your Jeep radio is not working?
There are several things that can cause a Jeep radio to stop working suddenly, but it’s hard to say exactly what your problem is without knowing more information. For example, if the monitor doesn’t turn on, it could be as simple as a blown fuse, or if the radio section isn’t working, but other audio sources work, it could be an antenna problem.
In this guide, we will let you know the necessary details about jeep radio problems and jeep radio issues.
Possible reasons behind a Jeep radio not working
If your Jeep radio is not working, just try to find and identify the problem. It can happen due to different reasons including:
- Wiring issues
- Battery issues
- Jeep radio antenna problem
- Audio settings
- Software issues
- Connectivity issues
- Speaker issues
After identifying the jeep radio problem you can fix it accordingly. Sometimes it can be complex to identify the problem by you. At this moment you can contact any professional to avoid any kind of serious issues.
How to reset Jeep radio? Fixing tips
There are many ways to fix your Jeep radio is not working but is important to identify the problem first and then perform the operation accordingly. Below are some tips to fix the issue of “Jeep radio not working”.
Check fuse first
If you get in your car one day and the radio won’t turn on at all, it could be an electrical or ground problem. You may need to check the fuses first. You can find it just below the dashboard of your Jeep driver’s side. If you find a blown fuse, try replacing it, and then drive around to see if it blows again. If it does, then you’ve probably run into some transient problem somewhere that might be more difficult to fix.
Check head unit
The head unit is the main component that controls the jeep radio. If there are issues like no sound, poor quality sound or issues in the display, it means there is a problem in the head unit of Jeep radio. It is the head unit that controls sound settings, display settings, and audio source settings. Now suppose you find that the head unit is not working, then you have to replace it to continue your entertainment in your jeep. For this, you must contact a professional to avoid further problems.
Also Read: Importance of a lighter while traveling
Check speakers and amplifier if Jeep radio is not working
If your radio is on, but you’re not getting any sound from the speakers, there are a lot of different potential culprits. The problem may be related to the amplifier if you have an external amplifier or speaker wire. Depending on where the amp is located, checking the amp can be easy or difficult. Some amplifiers have in-line fuses, while others are fused on the amplifier itself, and some installations have more than one fuse. If the amplifier fuse is blown, this could be the reason you’re not hearing anything from your Jeep radio.
Check the battery of your Jeep
Battery is considered as one of the major components in vehicles. So, if you are facing jeep radio problem you must check battery of your jeep. Your jeep radio will not turn on if your battery is dead or damaged. Because radio requires power to operate and if there is no power in battery, radio will not turn on. So, you can fix batter issues in the following ways.
- Attach an extra batter with already installed battery and start your jeep. After some time old battery will be charged enough to turn on radio (if there is no any other issue in battery).
- Replace old battery with new one
- Connect all the connections properly to avoid any damages
It is important to buy good quality battery for the best results.
Check and fix Jeep radio antenna
If you are facing the issue “jeep radio not working” it may happen due to jeep radio antenna issues.
A loose or corroded antenna can cause poor or no reception at all. In this case, tightening the antenna connection or purchasing a new antenna will solve your car radio problem.
One more surprisingly common Jeep antenna problem has to do with manually retractable whips. If your jeep has one of these and you haven’t checked it out, you’ll want to make sure no one repossesses it without you seeing it. If the jeep wash attendant pushes it in to help, or does it as a prank while your jeep is parked somewhere, you can easily crawl back, turn on the radio, and find it doesn’t work at all. Some vehicles were able to pick up some stations, depending on proximity and signal strength, with whiplash retracted, while others were unable to tune in at all.
You can replace or repair jeep radio antenna as per your requirements. It is very easy to install new antenna, but it good to contact a professional.
Check software
As it is the technology era and things work in a proper way. For example, jeep radio needs an operating system and firmware that control radio technically. If your jeep radio is not working properly, then it may happen due to software issues. If software is courted or outdated then it may cause different issues regarding jeep radio. You can update the software by installing new one from internet or you can reset already installed operating system. After that, if you are still facing jeep radio problem, you must contact a car audio specialist to get the problem fixed.
Check wiring
If your jeep radio is not working, you should check wiring. It can happen due to an issue in wiring. Proper wiring is necessary for radio to work properly. You must check all connections related to speakers and jeep radio. You should check all wires connected to speakers and radio and then fix if you find any damaged wire. If it is not fixable, you should replace it with a new one. It is good to consult a professional to avoid further issues.
Tips to maintain jeep radio for a longer time
If you want to use jeep radio for a longer time, you must take care of it. For this purpose, you should regularly clean it. Try to remove all types of dust and dirt on daily basis. Furthermore, always check jeep radio connections before going on drive. You can easily fix issues regarding jeep radio if you have basic tools to repair or update jeep radio.
Jeep radio upgrade or replacement expenses
Suppose you are on long drive and suddenly jeep radio stopped working, in this situation you must check battery, wiring, and fuse the fix the issue. Otherwise you will have to come back home without enjoying radio and now you have to upgrade or replace radio. You may have to spend on the following items.
Antenna
If antenna of your jeep is damaged, you have to buy new one which will costs around 30$ to 100$ with addition charges of mechanic.
Wiring
If there is issue with wiring, then it can cost up to 200$ or more depending on the condition of wiring.
Head unit
If jeep radio not working due to head unit, then you have to change it and for this you may have to spend 200$ to 500$ depending on the brand you choose.
Amplifier
If there are issues with amplifier, then you have to change it and for this you need to spend 100$ to 500$ as per your specific requirements regarding jeep radio.
Software
If hardware is ok and issues are with software, then you may have to update softer of your jeep radio. It is good if you find one online free, otherwise you have to spend 400$ to 1000$ for software installation and updating.
Final verdict
In the end, if your jeep radio stops working, just check it by yourself and try to find the issues. If you were unable to find the problem, then you should contact a professional to fix the problem. Furthermore, if you clean jeep radio regularly and use it properly then you may don’t need to worry in future regarding jeep radio issues.
